Amazonian Gold HueForge 3 Color - Free 3D Print Model

Search models, users, collections, and posts

BoDad

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

X1 Carbon

H2D

P1P

P1S

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 1 walls, 100% infill

Designer

3 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

HueForges are notoriously reliant on the specific filaments the designer uses. With this one, it's pretty tolerant of having the yellow highlight colour swapped out, so feel free to experiment with that (I've also printed this in green which works well too). The white however is still quite important - if you choose to use a different white, please stick with one that has a similar transmission distance or your results may very from my original design.

I get very irritated when designers use AI generated jpg's to illustrate what their design looks like - it never does! I will always ONLY publish images of the printed and finished design so you get an honest representation, and know exactly what to expect.

Boost Me (for free)

If you like any of my designs, please consider boosting them. It's free for you to do, but any designer will tell you that creating these designs takes many hours, a great deal of effort, and multiple prints to get things just right. It's a good way of showing your appreciation at no cost to yourself.

All the settings are in the print profile, but should you not have an AMS - after slicing, replace the colour changes with pauses and make manual colour swaps as detailed below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Deeplee Black Transmission Distance: 0.8
    PLA eSun EPLA Yellow Transmission Distance: 5.6
    PLA Deeplee White Transmission Distance: 5.6
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to Yellow
    At layer #16 (1.36mm) swap to White for the rest.

Comment & Rating (6)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.