Corsair RX/LX/QX Screw Plugs - Free 3D Print Model

Search models, users, collections, and posts

kalison

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

13 min

1 plate

4.8(9)

0.2mm layer, 2 walls, 15% infill

9 min

1 plate

4.7(3)

103% - 0.2mm layer, 2 walls, 15% infill

25 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

113

135

Released

Description

This is a very simple plug used to dress up or clean up the look of your Corsair RX/LX/QX fans.

Typically when using these fans you will have the screw holes looking at you in some form or fashion. If you have ever used traditional fan screws; these can make the holes look ugly/damaged, especially if you need to change their direction later on.

These are a quick easy print to plug the exposed screw holes to clean up the look of the fans. I only have Corsair LX Fans, but these should work just fine with the RX and QX fans as well. They are friction fit, and should be just tight enough to need a tiny bit of force to insert. To remove you may need to use a small screw driver or dowel to push them out from the other side.

You can print them to blend in, or add some colorful flair to your fans!