Aerial Refueling Pen | Retractable Probe | Stand

Summary

This is a pen in the likeness of an aerial refueling probe.  The pen even expands and retracts just like the real thing and there's even a gravity stand that looks just like the refueling port on a jet (such as the F-16, F-15, or B-1).  If you need a reference on what an aerial refueling probe is, its an arm that sticks out the back of a military aircraft (typically looks a lot like a passenger airliner) and then that probe is inserted into a port/hole on top of the aircraft that needs fuel, a fighter, bomber, another tanker, etc.  If you look at the pictures for this model you'll see a photo of what it looks like in real life.

Assembly

All you have to do to assemble the pen is to remove the tip/ink from a pen, such as a Bic pen, and then insert it into the tip of the printed pen.  Then insert that into the gray topper and pop the fins in the holes.

I tested this print with the Cristal Bic pen, so I know that works, however, other pens may work as well. If you wish to get the same pen that I used, here is an Amazon link:

• Bic Cristal Pens (Amazon link)

(Instructions are re-used from my missile pen, but its still the same assembly)

Bambu Filaments used were:

• Matte Ash Gray
• Matte Red
• Matte Yellow
• Matte Green
• Metal Iron Gray Black
• Basic Light Gray

( ! ) Do not sell my prints — I have not authorized selling prints.  If you sell my prints on Etsy, Amazon, eBay, etc, I will find out.

This 3D print is intended for decorative purposes only and is not suitable for children. Small parts may present a choking hazard and edges may be sharp. By printing this 3D print, you assume all liability for any harm to yourself or others resulting from its use.