Modular Extraction Hood with Shut-off Valve and Clamps
Print Profile(1)
Bill of Materials
- Flügelmutter_(wing_nut) x 12: M6
- Gewindestift_(threaded_pin) x 16: M6x30mm
Description
Modular extraction hood for spiral-seam pipes with a diameter of 100 mm, including a shut-off valve.
The base body of the extraction hood (200x200 mm) can be expanded to a maximum size of 450x450 mm using various extension plates (width 100 mm).
The shut-off valve easily snaps into the base body.
A recess (d=10 mm) in the base body serves as a cable feedthrough.
This recess allows for the subsequent mounting of a ring light on the inside of the base body.
If the recess is not needed, it can be sealed with a stopper plug.
Suitable clamps are included for mounting to spiral-seam pipes.
Individual sides can also be partially extended.
In my case, I reduced the front side by one extension level.
This allows for ideal adaptation to individual needs.
Perfect for welding, soldering, or painting stations.
Enjoy!
______________________________________________________________________________________________________________________________________________________
Modular extraction hood for spiral-seam pipes (d=100 mm).
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)