Volkswagen Car Charger Wall Mount

Update 12.2025: Added a version without the plug storage on the side. Width of this version: 100mm.

English:

This Wall mount is designed for the original Volkswagen car Charger for 220v sockets with the part number 000054412. The mount can be fixed with 3 countersunk screws with a maximum diameter of 4 mm and a maximum head diameter of 6mm.

I would recommend printing the part in ASA when using it outside or ABS when indoor but hot environment. PETG should also work fine indoors. I also recommend a high wallcount so that the screws can be securely mounted.

Update 12.2025: Added a version without the plug holder on the side of the mount. Width of this version 100mm.

German:

This wall mount was designed for the original Volkswagen 220v EV charger with part number 000054412, as supplied with models such as the e-Up! or ID3. The mount is secured with 3 countersunk screws, which should have a maximum thread diameter of 4mm and a maximum head diameter of 6mm.

I recommend printing the part in ASA if it is to be outdoors. If it is indoors, but the room and the charger get very warm in summer, I would recommend ABS; otherwise, PETG should also work. I also recommend a relatively high wall thickness to ensure sufficient strength in the screw mounting area.