love it. perfect for our horror house. thanks 

mysticaljo

0.12mm layer, 2 walls, 15% infill

3D_extreme

valy

This looks SO cool! The dove tail isn't perfect, hence the 4. But it was a great idea and we love it.Great detail.

Dragonlady

Runkel

ciaoo, grazie per la domanda, dopo qualche prova questa mi è sembrata la più stabile è resistente, in futuro ci potrebbero essere aggiornamenti per renderla ancora più stabile

Hello, thank you for your question, after several tests this seemed the most stable and resistant, future updates may improve its stability further

Just started the almost 8 hour print om my A1 Mini, after adding support with Bambu Studio.

Question, with no experience in designing things.
Would it have been better if the "hole" of the base would be in the hand, so you would slide the hand OVER the base, instead of IN the base. So the hand touches more of the building plate.
Now, even with support, it seems a bit fragile "down there" 🙂
Sorry for my not to good English.

WJV_NL

two prints failed not enough support. Model fell

Gnome-kabouter

These came out wonderfully, thanks for sharing 

Wicro

Mircea Mariș

Hembree3D

DanMan

cover

6.png

7.png

8.png

9.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

2025-02-23_bc12ecf91ca2a.png

Rafts:  No  Supporti:  Albero  Risoluzione:  0,2 mm di altezza dello strato, 4 superfici superiore/inferiore e 2 perimetri  Riempimento: 20%

Rafts: No Supports: Tree Resolution: 0.2 mm layer height, 4 top/bottom surfaces and 2 perimeters Infill: 20%

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Un remix pratico, artistico e inquietante di queste mani di cults3D: <a target="_blank" rel="noopener noreferrer ugc" href="https://cults3d.com/en/3d-model/art/2-male-hands">https://cults3d.com/en/3d-model/art/2-male-hands</a> . Per la base ho usato quattro tasselli per cartongesso e viti per legno per montare la base a parete. Poi, fai semplicemente scivolare la mano direttamente sopra.I quattro file che vorrai stampare: Right_hand_v2, Right_hand_base, Left_hand, Left_hand_baseAGGIORNAMENTO 2/4/25: Sembra che abbia caricato per sbaglio il file sbagliato della mano destra! Per chiunque abbia già stampato right_hand_v1 (che ho sostituito con Right_hand_v2) e voglia comunque utilizzare la versione precedente della mano, ho ricreato la vecchia base, per ogni evenienza.Specifiche delle viti:  Diametro: 3 mm  Lunghezza: 19,5 mm  Passo della filettatura: 1 mm (anche se non credo che questo sia molto importante se si utilizzano tasselli per cartongesso)&nbsp;Supporti:  Albero  Risoluzione:  0,2 mm di altezza dello strato, 4 superfici superiore/inferiore e 2 perimetri  Riempimento: 20%&nbsp;progetto di:https://www.thingiverse.com/thing:6933970

A practical, artistic, and unsettling remix of these hands from cults3D: <a target="_blank" rel="noopener noreferrer ugc" href="https://cults3d.com/en/3d-model/art/2-male-hands">https://cults3d.com/en/3d-model/art/2-male-hands</a> . For the base I used four drywall anchors and wood screws to mount the base to the wall. Then, simply slide the hand directly on top.The four files you will want to print: Right_hand_v2, Right_hand_base, Left_hand, Left_hand_baseUPDATE 2/4/25: It seems I accidentally uploaded the wrong right hand file! For anyone who has already printed right_hand_v1 (which I replaced with Right_hand_v2) and still wants to use the previous version of the hand, I have recreated the old base, just in case.Screw specifications: Diameter: 3 mm Length: 19.5 mm Thread pitch: 1 mm (although I don't think this is very important if you are using drywall anchors)&nbsp;Supports: Tree Resolution: 0.2 mm layer height, 4 top/bottom surfaces and 2 perimeters Infill: 20%&nbsp;Project from:https://www.thingiverse.com/thing:6933970

Print Profile(1)

Description

Comment & Rating (18)

License

Related Models

Curtain support

Print Profile(1)

Description

Comment & Rating (18)

License

Related Models