Upgraded Poco M4 pro 4G case

Hi im sorry for that but i also have a few questions for you 1.Why you were printing it with PLA? 2.What way were you printing it? From what i remember it was placed in such a way that you could remove the supports in like 5 minutes 3.Also, if you have any tpu just print it in this material 4.I would be delighted if you could print it that way, and tell me how it worked no Ps. if you want to try again to print that in PLA try heating the case with a hairdryer, if you have any more questions or smth tell me

as you may have seen, i added a generic TPU profiles so again it would be nice if you could try it or some of the methods i mentioned earlier, also with that PLA thing, my case was printed with PLA so everything i tould you about is checked and etc. so I'd happy if you could try again with my "hints"(And also change the rating if possible)

Hey, thanks for asking Yeah of course you can, but you must remember that pla+ is not a soft material, so if you want to fit the phone in the case there's no other way than heating it up with a hairdryer or smth, the hairdryer thing is the way i used, it may not be perfect method but it's probably the safest, also as you can see it worked fine so in case of any more questions feel free to ask. Have fun printing:)