Had to scale the stand to 135% before the sign would fit.

Papa Squatch

0.2mm layer, 2 walls, 75% infill

Thanks for the notice me. Now is re-worked the sign model scale to fit the stand correctly 

Klip_CZ

0.2mm layer  - updated scale to fit the stand correctly

Im Grunde genommen hat alles gut geklappt. Nur der Ständer passte nach wie vor nicht. Ich habe mir die Datei im Slicer angeschaut und in der Theorie sollte der Spalt des Ständer weit genug sein damit man das Schild reinstecken kann. Aber nachdem ich alles gedruckt habe, passte das Schild trotzdem nicht rein.  Dieses kann natürlich dadurch kommen, dass  der Druck winzige Toleranzen in der Dicke hat und es dadurch dann nicht passt. Daher würde ich den Ständer beim nächsten mal ein paar Prozente größer drucken.

Essentially, everything worked well. Only the stand still didn't fit. I looked at the file in the slicer and, in theory, the stand's gap should be wide enough to insert the sign. But after printing everything, the sign still didn't fit. This could, of course, be due to the print having minute variations in thickness, preventing a proper fit. Therefore, next time I would print the stand a few percent larger

lokermarc

MK2MR2

Druck hat super geklappt der Ständer muss auf 135% skaliert werden

The print was incredibly successful the stand needs to be scaled to 135%

sbuchwald

Hi. Did you use the updated profile for model of sign? The new profile fit the stand correctly, without rescaling.

Keine Ahnung ich habe die beiden Modelle am 11.03.2025 runtergeladen und so viel ich mich noch erinnernen kann dann den Ständer angepasst und gedruckt.

I'm unsure, I downloaded both models on March 11th, 2025, and as far as I recall, I then adjusted and printed the stand

yes, the profile has been re-worked on March 13th .. sorry for trouble  

Terr0r_Arie

P!!nky

watson_king

Ryan Rhys

cover

IMG_20250221_213033 - kopie.jpg

IMG_20250223_003932 - kopie.jpg

IMG_20250223_003945 - kopie.jpg

IMG_20250223_003959 - kopie.jpg

IMG_20250223_004011 - kopie.jpg

IMG_20250223_004024 - kopie.jpg

plate_1.png

vedule nova 3.png

vedule nova 2.png

IMG_20250221_213033.jpg

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle></boostme>Funny sign - Have you tried turning it OFF and ON again ? A must-have on every IT support worker&#39;s desk :-)Updated version, with stand &nbsp;Note:  updated the  scale of the sign model to fit the stand correctly &nbsp;Note: You have to print the stand with 75% infill to be heavy

Print Profile(2)

Description

Comment & Rating (77)

License

Related Models

Have you tried turning it OFF and ON again ? SIGN

Print Profile(2)

Description

Comment & Rating (77)

License

Related Models