Search models, users, collections, and posts
Ethernet cable tag/clip/label
IP Report
Print Profile(3)
V2; PETG; 2 clips; 9x40mm, 0.2mm layer, 6 walls, 25% infill
Designer
33 min
1 plate
V1; PETG; 2 clips; 9x40mm; 0.2mm layer, 6 walls, 25% infill
Designer
34 min
1 plate
new size: V2; PETG; 3 clips; 13x40mm, 0.2mm layer
Designer
35 min
1 plate
Open in Bambu Studio
Boost
69
252
13
4
228
142
Released
Description
2025-03-09 Update: V2 now has stronger label holder!
This is a clip/tag for ethernet cables. Use this to attach laminated labels printed from a Label maker like a Brother P-touch labelmaker.
- The size of the area to attach the label to is 9 x 40mm. (My Label maker uses 9mm tape.)
- These are intended for cables from about 4.3 to 5.3mm in diameter.
- In my testing with PETG they snapped on without problems and stayed on reliably.
- I did not yet try printing them in PLA.
- The print orientation is important for strength! Do not print them flat.
- You can increase the number to be printed in Bambu Handy (look for ‘Copies in a plate’) or Bambu Studio (use the Clone function)
Let me know if you'd like me to provide different sizes!
Boost Me (for free)
Boost appreciated!
History:
- 2025-02-22 Released initial version in 9x40mm label size
- 2025-03-09 New version V2: Increased the thickness of the label holder from 1 to 1.5mm to increase strength
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)