Extension pole mounted nozzle for Dewalt airlock

I designed this to clean some debris from roofing that I didn't want to climb on. It attaches to the Dewalt Airlock system and accepts an extension / painters pole with a standard 3/4" 5 TPI Acme thread. For extended reach Dewalt have the DEWDWV9316 4 meter airlock extension. You can also use this for cleaning gutters, although you might need an off-the-shelf extension pole angle adapter so you can get the nozzle to point straight down if you're doing it from ground level.

You'll get a warning about a floating cantilever and enabling supports, but ignore that it has thick bridges enabled and prints fine. If supports are enabled you'll get them inside the Acme thread which is tricky to remove cleanly.