IVY Esk8 Exway MT200 CST Electric Skateboard Hubs

3D printed electric skateboard hubs, with tire links included in the BOM.

Nylon or PETG filament is recommended (38 filament from 3D printing factories also works well and can be a cost-effective alternative). We also suggest using Bambu Lab's PLA/PETG support filament to improve support smoothness.

Avoid prolonged sun exposure (especially while stationary), as UV rays can accelerate plastic degradation, and high temperatures may cause melting.

Several different timing pulleys are uploaded in a separate 'pulleys' folder, however, please perform test prints first, as some bridges may not be compatible with all models.

All original design files have been uploaded to facilitate customization.

Also, if you are using Meepo gearboxes, congratulations, the connector is compatible (see Figure 2).

Regarding bearings, considering durability, 26mm outer diameter and 8mm high bearings are used. For 10mm shaft bridges, please use S6000 bearings, for 8mm shaft, a non-standard bearing is used, reference link: https://e.tb.cn/h.THcQCUxx5MmR5Mk?tk=dgTDe8oszcm