Ipad Pro 9.7 Cover

Ipad Pro 9.7 (First Gen) Cover

Recommended Settings: TPU95A, 0.4 Nozzle  on A1/P1/X1 series.

Attribution

This remix is based of the following model from Thingiverse:

Case for 9.7" iPad Pro- keyboard compatible
by BananaMan4444 is licensed under Creative Commons - Attribution.

Description

This is both my first model in an attempt to learn Fusion 360 as well as my first upload, so please let me know if I've made any mistakes in this post.

I really liked BananaMan4444's Ipad Pro case and wanted to add a bit of protection/comfort around all sides,  as well as adding a 2mm offset top lip to ensure the Ipad stays in solidly in place for when drops occur.

No Magnetic Front cover or Keyboard Support. This is just a simple rear case with full coverage.

Printing Notes

** I highly recommend TPU 95A for this. You may be able to get decent results with Bambu TPU for AMS, but anything else like PETG or PLA might be way too stiff may not allow enough flex on the lip to work itself over the edges.

Normally I'd use Generic TPU profile for Inland (Microcenter) TPU, but in this particular case I left it as Bambu TPU95A for filament selection and it printed well enough for my needs. 

Hope this works for anyone else out there looking for a case for the OG Ipad Pro.

Enjoy! :)

	This remix (left) compared to BananaMan4444's original case (right).