Nex Playground Console Wall Mount

Nex Playground Wall Mount w/ Controller Holder

not an official product of Nex Playground.

photos shown are printed in bambu lab's pla basic turquoise;

• .40mm stainless nozzle
• .20 layer height
• supports enabled- normal/grid/.29 top z offset (adjust to your preferences)
• triangle infill at 15%
• mounting holes for #8 screws

i designed this wall mount after not seeing anything available on any of the 3d printing sites for mounting the nex playground which my children got for christmas.  i didn't want a full shelf right under neath the TV and we have plenty of controllers strewn about so the holder seemed necessary.  this model has added depth behind the console to allow for the power cord and hdmi cable to come out and not be at an awful angle, as well as an inset sized perfectly for the bottom of the console to seat in and not fall off.

this is my first uploaded model and has a shameless plug for our new venture of selling prints inset on the wall side of the print.  shouldn't cause any issues with the print but if for whatever reason it does feel free to delete it under the objects tab in bambu studio.

if you are interested in selling these wall mounts, please message me and we will work through the commercial licensing deal.  any and all boosts or income made from this model goes to paying for my children's sports as we are on a traveling team and spending several weekends away from home in hotels as well as airfare for end of season championships.  thanks for the support!