Ultimate Moss Pole - Modular Plant Support

This is my attempt to make the Ultimate Moss Pole here on MakerWorld!

It's a work in progress, but the main parts are ready for you to try out. Feel free to suggest any improvements or accessories. If there's enough interest in a particular request, I will probably attempt to make it.

FEB 2026 update (BIG ONE)

• Finally added Adjustable Dripper. this does notrequire any screw rather uses custom 3d printed parts. It's a beta version, but I think I works great. Let me know if you try it out! (only tested for default size, but scaled versions prepared for FAT and Ultra FAT).
• V2 Moss Pole Clips - sturdier version that fits much better. 3 sizes for each Default, FAT and Ultra FAT.
• Centered Pole Stand
• Now allowing adaptations, see licence

JAN 2026 update

• I've been getting a lot of requests and comments that it's hard to keep up with. I'll do my best going through and replying to everything. However if you want a fast response the best place is on our Patreon (you can message without membership ofc). Thank you for your support for this project.

Sizing

• Default ⌀45mm, height 235mm
• Slim ⌀35mm, 104mm
• Fat ⌀60mm, 206mm
• Ultra Fat ⌀80mm, 205mm (can be scaled to ⌀90 on X1C, or more if you have H2D)
• Default version for A1 mini ⌀45mm, height 155mm

(Note: The height measurements are for the base part excluding the top thread. The default size uses an M42×4.5 thread. Feel free to scale these versions to your preference.)

Patterns

• Diamond (Quick and easier to print, consumes less material)
• Hexagon
• Half Closed Hexagon (NEW!)
• Voronoi (wip)

Accessories & stuff

• Basic Stake (for smaller plants, no repotting required)
• 2 sizes of Pole Stand (more stable, requires repotting)
• Basic Top Cap
• Hex and Diamond Crown Caps
• Watering Reservoir
• Helper Stick
• Plant Clips

Tips & other

• Bed adhesion - all parts can be printed without glue/3dlac, provided you have good enough bed adhesion. I personally always use 3dlac to avoid any failures
• Sphagnum moss can be found on amazon, if you are interested in high quality cheap sphagnum moss (40€/ kg) message me, I can ship to most countries in central Europe :)
• Fuzzy skin can be enabled and it looks good esp. on the diamond pattern. If you are adding fuzzy skin, do not apply it to the top thread (use modifier).
• Fusion 360 files can no longer be requested via message due to this model appearing on other model sites. I will provide fs360 files for the threads so you can create your own components.