Deck Box Bulbasur
Print Profile(1)
Description
A custom Bulbasaur box for storing card decks.
A piece of filament suffices for the hinge, and a small spring from a pen will do for the closure.
Supports must be enabled to print the central part and the closure.
ASSEMBLY INSTRUCTIONS:
1.- Use cyanoacrylate glue to attach the tab to the top of the box with the protrusion facing inwards:
2.- We will use a spring from a pen for the closure spring:
3.- We use cyanoacrylate glue (you can also use hot silicone) to glue the lower part of the closure, and then the entire closure to the bottom of the box:
4.- Finally, use a piece of filament to create the hinge; gluing the ends is recommended:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)