Search models, users, collections, and posts

Pixel 9 / 9 Pro case - PLA

InnovatorBeerJr
Hobby & DIY>Electronics
IP Report

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
52 min
1 plate
4.3(32)
Open in Bambu Studio
Boost
74
155
40
7
729
456
Released 

Description

This simple Pixel 9 case is a temporary while my other one comes in the mail. Intended to be printed in PLA/PETG and is intended to be a clean simple design. 

 

Flat edges means the phone will rest on its side without an issue. 

 

pixel
google
pixel 9
pixel 9case
pixel9
pixel9pro
a1 mini
a1
phone
cellphone

Comment & Rating (40)

(0/1000)
@user_1203290975
Boosted
Great print. Printed in TPU on A1Mini. Thank you!
(Edited)
The designer has replied
0
Reply
@InnovatorBeerJr
very nice! what kind of tpu did you use? I haven't tried any yet on my mini yet.
0
Reply
@user_1203290975
Boosted
Replying to @InnovatorBeerJr :
SainSmart TPU. Not cheap, but works very well. You can buy it on Amazon.
designer
1
Reply
@user_2382786922
Print Profile
0.2mm layer, 2 walls, 15% infill
Too small for Pixel 9 Pro. Don’t use.
The profile uploader has replied
0
Reply
@InnovatorBeerJr
odd it worked ok for my pixel 9 and cases are two way interchangeable with pro . pixel 9 XL uses a different case though
0
Reply
@Mr.Monkey
Printed in silk PLA+ and it did come out great on smooth PEI plate, but it's very tight. You can see it split on the tolerance and the thickness need to be increased about 1mm.
0
Reply
@Gimbo
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
@DonEduardo
Hey thanks, I wanted something quick for the same reason, a basic cover until my ordered case came in. Printed in PETG for a bit of flexibility. Nice fit and did the job.
The designer has replied
1
Reply
@InnovatorBeerJr
perfect!
0
Reply
@user_4162098023
Print Profile
0.2mm layer, 2 walls, 15% infill
a little too shallow, a drop on the front wouldn't protect the phone. Needs to be about 2 or 3mm deeper to cover the glass edge.
0
Reply
@user_978869145
Print Profile
0.2mm layer, 2 walls, 15% infill
it's on my phone
0
Reply
@eichstaett
Print Profile
0.2mm layer, 2 walls, 15% infill
Handy fits in the case, but the case is much too low, so the phone sticks out at the top and the case is unusable
Show original
0
Reply
@Lavrios
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
It held up well, although it broke slightly on the underside. It is very nice for temporary use however
Show original
0
Reply
@retrosumo13
Print Profile
0.2mm layer, 2 walls, 15% infill
it's not great. hardly fits and kind of just falls off
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Flat-Edged AirPods Pro (2) Case
Flat-Edged AirPods Pro (2) Case
gimpelginster
24.4 k
7.1 k
Toothbrush Travel Case
Toothbrush Travel Case
angrelou
34.6 k
9.2 k
Mini Iphone 16 Pro
Mini Iphone 16 Pro
Oleksandr T2L
31 k
10.7 k
Case for Pixel 9 Pro XL
Case for Pixel 9 Pro XL
BuildyBryce
876
108