traffic cone, colapsable
Print Profile(1)
Description
collapsible traffic cone. two sizes 175mm base for an A1 mini and 240mm base for X1C and P1P
the size is:
Cone 1
base: 240 x 240, (9.4in)
Collapsed 116 tall (4.57in)
expanded 440mm tall (17.3in) approximately
Cone 1 175
base: 175mm x 175mm, (6.9in)
Collapsed 100 tall (4in)
expanded 400mm tall (16in) approximately
The photos show the 240mm size. You can see the size with the soda can, or tire.
because of the gap layer between the parts. this would not change scale much.
When printing The slicer might warn you that there are “floating objects”. This is from a gap layer between parts.
Depending on your specific filaments and slicer settings the floating objects might be a problem. Just like the first layer it would be good to observe this. With the current setting it is layer 16 and 17. Layer 16 (first layer above the gap) might look a little different, but layer 17 should look normal or close to normal.
Some modifications you might make:
Change the filament for part as I did in the print. Giving it a two tone look.
Add a text modifier to the base. adding your name and or phone number. By adding this to the build plate it does not add lots of poop, or time.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)