Super Lube Cap - Now with satisfying CLICK! - Free 3D Print Model

Search models, users, collections, and posts

j3Dh

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 15% infill

Designer

12 min

1 plate

4.9(89)

Open in Bambu Studio

Boost

156

414

114

795

464

Released

Description

Lost your Super Lube cap? Worried about spilling oil all over your makerspace? This replacement cap fits super snug with that satisfying click you are looking for.

Tested on the 4 US fl oz (118.29 ml) bottle of Super Lube Multi-Use Synthetic Oil. Part number 51004. I can't guarantee this will work on other variations.

No brim or supports needed. Prints in less than 12 minutes.

Boost Me (for free)

If you find this useful, please consider giving the model a boost.

lubrication bottle accessory

oil

replacement

replacement cap

Comment & Rating (114)

@LostMeteor

Print Profile

0.16mm layer, 3 walls, 15% infill

Mine didn't come with a cap. saved me from having to design one myself. thanks!

@3DLABANDMORE

Print Profile

0.16mm layer, 3 walls, 15% infill

works great 👍

The profile uploader has replied

@user_4060576049

Looks awesome. Thanks for rating it.

@sawqa

Print Profile

0.16mm layer, 3 walls, 15% infill

thank you! fits perfectly and snugly

@IraLunaUmbra

Print Profile

0.16mm layer, 3 walls, 15% infill

works perfect and the click make me so happy 😁

@Jeeky

Print Profile

0.16mm layer, 3 walls, 15% infill

Mine didn't come with the cover clicks in place printed with petg

@OzDruiD

Print Profile

0.16mm layer, 3 walls, 15% infill

works well

@JustUnicycle

Print Profile

0.16mm layer, 3 walls, 15% infill

Printed in PLA, clicks lightly on TapMagic, clicks on SuperLube. Both click off. Thanks!

@Invader_Akira

Print Profile

0.16mm layer, 3 walls, 15% infill

Printed it in HS PETG. It came out nicely

@JDPham

Print Profile

0.16mm layer, 3 walls, 15% infill

i don’t get the satisfying “click” but the cap works well since my super lube didn’t even come with a cap. thanks Amazon

The profile uploader has replied

@user_4060576049

You may need to trip a little more off the end of the tube to allow the groove in the cap to reach the ridge on the bottle.

@ThaBeavster

Right, Amazon got us! I didn’t get a click either. The model creater is suggesting modify the bottle, but imo it may allow too much oil to come out. I believe that the model needs to be modified.

(Edited)

@StudBrownie

Replying to @ThaBeavster :

agreed. should not have to modify the bottle for print to work.

(Edited)

@ThaBeavster

Print Profile

0.16mm layer, 3 walls, 15% infill

Cap printed well, but it didn’t “click” for some reason, so being careful with my bottle because I don’t want it spilling. Wouldn’t let me rate more than 3 stars.

Other Issues:No “snap/ click”

The profile uploader has replied