Mystery Box Spacebar | COD Black Ops Zombies

Mystery Box spacebar from Black Ops Zombies. Fits any mechanical keyboard with cherry stems and a standard-sized spacebar. Super glue required.

Instructions:

1. Print either the fused plate (less gluing and supports, but worse quality) or the separated plate (more gluing, nicer top surface).

    

2. Print the question mark panels.

    

   Note: I printed mine in gold silk pla, but I would recommend printing in a normal yellow as I believe it would shine brighter (I don't have any yellow at the current moment).

    

3. Print the latch and hinges in the second 3mf file provided. Make sure to remove each piece from the build plate with caution as they are small and prone to snapping.

    

   Note: Due to the extremely small size and nature of fdm printing, you will likely need to clean up each of these pieces with a utility knife.

    

4. Use the provided pictures to glue and assemble.

    

   Note: The front latch can be very tricky to assemble and might require some patience. I would recommend trimming the square handle enough to snap into the recess in the other latch piece and then gluing both into its slot. 

    

5. (OPTIONAL)

   For extra wear and detail, you can get some rough sandpaper and lightly scratch up the surface to give it a more worn look.