Samsung Galaxy Fit 3 Charging Station

Search models, users, collections, and posts

sleeky

Hobby & DIY>Electronics

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

54 min

1 plate

4.9(53)

0.2mm layer, 3 walls, 50% infill

Designer

1.4 h

1 plate

5.0(26)

0.2mm layer, 2 walls, 100% infill

Designer

2 h

1 plate

4.9(17)

0.12mm layer, 2 walls, 50% BOTTOM WEIGHTED, 15% OTHER

2 h

1 plate

5.0(19)

Open in Bambu Studio

Boost

201

505

121

1.4 k

978

Released

Description

Since I've bought the watch I always wanted to have some kind of stand for my watch when charging because of the cable. So I have designed and printed a small charging station where you can just put your charger inside and that's it!

Dimensions 📐

This model fits the Samsung Galaxy Fit 3 charger.

Assembly 🔧

There is no assembly really! The print itself is just a print-in-place model which just needs the charger to be inserted. You then have to push the cable through the channels.

Share your experience 📣

If you come across any problems or difficulties, please share your opinions in t

he comments or PM me. I would love to help you out and solve any problems you may encounter. If this model has helped you, please leave a review or comment and boost me if you want to support my work.

Boost Me (for free)

A boost means a lot to me and it supports my work and hobby, which I love doing!

Comment & Rating (121)

@JMP_Driftwood97

Print Profile

0.12mm layer, 2 walls, 50% BOTTOM WEIGHTED, 15% OTHER

Printed at 0.2 Turned out Great.

@tanuzzo

Print Profile

0.2mm layer, 2 walls, 15% infill

The model is exquisitely engineered. It integrates a design with a perfect groove for the original charger. Perhaps I would slightly weigh down the base by increasing the infill in the lower section

The profile uploader has replied

Show original

@sleeky

Thank you for your feedback and nice print! I think your idea about adding dense infill to the base is great! I will be adding a profile as soon as I can :)

(Edited)

@Menaceprints

Print Profile

0.12mm layer, 2 walls, 50% BOTTOM WEIGHTED, 15% OTHER

girlfriend got a new watch and needed a stand she loves it

@co8urn

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect solution 🙂

@diztracted23

Boosted

Print Profile

0.2mm layer, 2 walls, 100% infill

Turned out great. I like the heavier feel thanks to the 100% infill.

@lisjak

Print Profile

0.2mm layer, 2 walls, 15% infill

Final print looks amazing.

@grog66

Print Profile

0.2mm layer, 3 walls, 50% infill

Very nice to print I printed it in white PETG

Show original

@asmodeus7

Print Profile

0.2mm layer, 2 walls, 15% infill

It works great! easy print, the cable fits easily and it's not lose.

@Qmax3D

Boosted

Print Profile

0.2mm layer, 2 walls, 100% infill

it’s very good

@Leogpdi

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent support. Great design and it is very stable. Congratulations on the project!!!

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.