monitor.riser
Print Profile(4)
Bill of Materials
- sandpaper40grid x 1:
- sandpaper120grid x 1:
- epal.pallet x 1:
- wood.stain x 1:
- glue x 1:
Description
This monitor stand is designed to be built using 3D-printed components and the 100x22 mm slats from a Euro pallet. Although these slats are officially standardized at 100 mm in width, their actual dimensions often vary, usually being slightly smaller. The construction is therefore optimized for slats with an approximate width of 92 - 100 mm. The combined width of the pallet slats must not exceed 200 mm. (Keep in mind that sanding can also reduce the width of the slats.)
The base print profile includes only the stand feet, while additional components such as platforms, drawers, and fixing wedges in different sizes are provided in separate profiles. This modular approach allows you to customize and configure your workspace according to your needs.
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (64)