Canadian Forces Badge/Crest Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 155.64x200mm in size

You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 4.2mm and the Actual Depth is 4.2mm

This print uses 5 unique filaments - To use 5 filaments with the AMS Lite, use the slot for the Navy Blue filament for the White filament as well.  Once the Navy Blue is finished, about 2 hrs, let the machine continue printing and swap the Navy Blue out for the White.  As long as you told the slicer to use White in the slot containing Navy Blue, you should have no issues.

Swap Instructions:
    Start with a Navy Blue
    At layer #22 (1.84mm) swap to Black
    At layer #30 (2.48mm) swap to Red
    At layer #34 (2.8mm) swap to Yellow
    At layer #39 (3.2mm) swap to White for the rest.

I will include a profile for the A1 Mini which will scale the model to 85% and add a height range modifier to print the first 1.6mm in 0.2mm layers.  This greatly improves adhesion and print speeds.  Note that this will change the swap instructions so if you use my profile, make sure not to use the above instructions but instead use the instructions in the profile.