Architectural Trees Basic Pack #2 - Round shape

3 individual tree/plant models for architectural projects optimized for 5 different scales, print-in-place.
Use freely in your own architectural projects with attribution to Citylab.lv, or purchase a Commercial-Use License on my website.

(!) Print with the settings I'm sharing. A small inaccuracy can lead to a failed print when printing trees and plants with overhangs. So most importantly - print with low speeds (but not too low), including travel, and minimize warping on overhangs, so keep cold air away from the print. Keep bed temp a little higher for some material softness if the trees have trunks, so it can bend a little without breaking. Use 0% infill and no supports. Tested on BambuLab P1S with old and brittle PLA filament to be sure that the models and settings are as fail-proof as possible.

(!) Changing scale not recommended
(!) Tested only on Core-XY printers (bedslingers not recommended)

For any feedback and inquiries contact me: citylab.lv@gmail.com