LED Monitor Table

Hello,

This is a monitor riser with integrated LED lighting for your desk.
It elevates your monitor approximately 12cm, providing 10cm of usable space beneath the platform.

The entire structure is designed for support-free 3D printing and requires no assembly.

I used transparent PLA for the bright filament, and black PLA for the rest—ultimately, a matter of personal preference. However, maintaining the transparent filament is recommended, as I am unsure whether the LED strips will shine through opaque PLA.

I utilized a black wooden platform measuring 100cm x 20cm x 2cm. While the length is adjustable, the width and height are fixed. You may opt to use only the outer supports or multiple central ones, depending on the platform length and personal aesthetic. The platform can be secured with two screws or nails via pre-drilled holes in the supports, although it remains stable without (my personal preference).

Installing and soldering the LED strips requires some dexterity, but it is achievable. I may refine this aspect if time allows. To enhance the effect, I adhered the remaining LED strip to the underside of the platform, between the supports.

The following items were used, but alternatives are readily available (no endorsement intended):

-https://www.amazon.de/dp/B0CGZQ1MH9?ref=ppx_yo2ov_dt_b_fed_asin_title

-https://www.amazon.de/dp/B0BDG93517?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I hope you enjoy this project as much as I did, and I would appreciate a like!