Sticks Gripper mode TPU
Print Profile(1)
Description
Boost Me (for free)
If you like the design I would be very happy if you supported me with a boost.
These sticks are designed for those who fly with tweezers, their design offers greater comfort and softness to the touch without losing grip.
These sticks are originally designed for use with the Jumper T15, but if your gimbal rods on your radio control have a diameter of 2.8mm and a length of 15mm they should work too. I will soon upload a larger diameter STL file for other radio models.
It is recommended to print them on TPU, it is not necessary to use supports or metal threads. When you print them and want to install them, you must make sure that the tolerances of your printer are correct. When installing them, you must apply a little pressure and then turn to screw them onto the rod. Don't forget to be careful and not apply too much pressure so that you don't break the gimbals.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)