Orthodox Easter Cheesecake Paskha Paska Pasha Form

This is a form for making Orthodox Easter Cheesecake Paskha (Paska, Pasha, Пасха in Russian, пасочница). 

The width of the large form is 15 cm at the base, 7 cm at the top, and 15 cm in height, with a volume of approximately 1.9 L.

The smaller form is scaled to 85% so that you can print two sides simultaneously. The base is 12.5 cm, the top is 6 cm, and the height is 12.5 cm.

There are multiple plates. “Large” plates are for the larger version and “small” plates are for the smaller version.

There is an optional lid.

Close with clamps or toothpicks. I suggest lining it with food-grade plastic cling wrap inside.

You can scale it to any size, just be sure to scale in Z dimension also, otherwise it might not close properly. If you decide to print from STL, be sure to lay down the pieces to the plate properly (it visually seems that they lay down on the plate when imported, but they are not!).