Roborock Qrevo [MaxV PLUS Master PRO S] Dust Bin
Print Profile(1)
Description
Boost Me (for free)
What started as a small idea has gradually become a passion. More and more often, I receive requests from users asking if I can design containers for other models as well – yes, I'd love to! Please support me with a Boost for the test prints. Thank you very much!
Dust Bin for the Roborock Q Revo [PLUS] [MASTER] [PRO] [MAXV] [S]
This reusable dust bin replaces disposable filter bags and allows for easy emptying
- The two halves are connected with a 1.75 mm filament piece that serves as a hinge
- Two clips securely close the container and allow for easy opening and emptying
- The seal is glued into the designated recess
- The filter used corresponds to that of the robot's original dust bin
- The container has been optimized and tested for easy use
- Note: The support on the small part must be removed very carefully to avoid damaging the clip's bridge
- The filter fits extremely precisely – when replacing it, it should be removed gently to avoid damage
Material recommendation:
- Printed from PLA, which in my experience is completely sufficient (The seal is made of TPU)
‼️ Important note: To make removal easier, one of the clips can be opened. Additionally, a handle has been added to the adapter piece to safely remove the container
⚠️ Disclaimer: The use of this dust bin is at your own risk. I assume no warranty or liability whatsoever for damages that may arise from its use
👉 See also my dust bin
❤️ A big thank you to Blacklion89 and to FilamentForce!
They have agreed to help me provide the dimensions and test the model with test prints
| PLUS | ✅ | pknocku |
| Master | ✅ | FilamentForce |
| Pro | ✅ | Dean |
| Slim | ✅ | pknocku |
| S | ✅ | Rabauke1986 |
| Edge | ✅ | LivBigSki |
| MaxV | ✅ | pknocku |
| QV 35A | ✅ | danshti |
| QV 35S | ✅ | pknocku |
| QR 598 | ✅ | pknocku |
| L | ✅ | PortakalFrog |
The two plates (or models) differ only in the filter. Please compare which filter is installed in your vacuum cleaner before printing
| Plate 1 |  |
| Plate 2 |  |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (302)