Judge Dredd HueForge 2 Color

I fancied trying something a little different this time, so here is a HueForge that is extremely easy to print, and one in which you can substitute filaments without fear of it corrupting the end result.

My Judge Dredd HueForge has virtually no shading with it being blocked line art, so whatever TD filament you use should be absolutely fine.  Normally it's extremely important to use the correct filament as specified in a HueForge, but this is an exception - use whatever you like.

It's a quick print that slices quickly as well.

I hope you like it as much as I do.

I'd love some feedback, constructive criticism and/or suggestions for future designs.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:
    PLA Deeplee Black Transmission Distance: 0.8
    PLA Deeplee White Transmission Distance: 5.6
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to White for the rest.