IKEA Lack Extension (200 mm, 150 mm, 100 mm)

I designed this piece to extend the feet of my IKEA Lack table up to 200mm, whilst still remaining stable. To ensure this it fits tightly onto the already existing foot and can screw into the foot itself. 

I created different models, one that can screw be used as an extension and one that can be screwed into another IKEA Lack table or anything else. I also created a connector without extension in order to stack two Lack tables onto each other (this part can also be used to connect the lack table to other surfaces of course). 

For the assembly I used 3.0 x 16 mm screws. Depending on which part you print you will need either 8 or 11 screws per leg extension. Longer screws are not necessary due to the IKEA Lack tables being hollow on the inside. 

I am thinking of making an IKEA Lack enclosure for the Bambulab A1 / A1 Mini. If anyone is interested in this please let me know as I will upload it to MakerWorld then. Any feedback is welcome and please share pictures as I would love to see what you use the 3D print for. 

Thank you for your support!