Tulip Magnet

Model Size: 50x54x15 mm

Magnet Fit: Designed to accommodate 20x3 mm Ferrite Magnets—you can adjust the negative space for the magnet hole as needed, but for a good fit, allow a 0.3 mm clearance on all sides.

Color Options: works well in both multicolor or single-color variations, depending on your preference and printer capabilities.

If you print this model, I’d love to hear your thoughts. Let me know how it worked for you and if there’s anything that could be improved—I’m always looking to refine my designs!

*Please note that the STL file does NOT include the negative part for the magnet hole.

Print Profile:

• 0.16mm layer height
• Supports needed -> Top Z Distance: 0.24mm
• 2 walls, 8% infill density, Gyroid pattern