CP-140 or P-3 Propeller Hueforge V2

I found the photo online when I was searching for some nice propeller pics of the CP-140 Aurora, the Canadian variant of the P-3 Orion, and I came across this one.  Put it through Hueforge and voila! I love how detailed and crisp it looks! This is my second version.  You can see the first by checking out my other models.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x133.33mm in size, and scaled to 85% for the A1 Mini but you can scale it up.

This profile is set up with a height range modifier so the first 4 layers are printed at 0.2mm and the remainder at 0.08.  This decreases print time and increases layer adhesion for the base layers.

This print uses 4 unique filaments

Swap Instructions without the height range modifier:
    Start with Black
    At layer #10 (0.88mm) swap to Dark Gray
    At layer #15 (1.28mm) swap to Light Gray
    At layer #21 (1.76mm) swap to White for the rest.

Swap Instructions with the height range modifier as in the profile (first 4 layers at 0.2mm):
    Start with Black
    At layer #6 (0.92mm) swap to Dark Gray
    At layer #11 (1.32mm) swap to Light Gray
    At layer #17 (1.80mm) swap to White for the rest.