Tiki Statue - Free 3D Print Model

Search models, users, collections, and posts

Monchy_Bois

Art>Sculptures

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.9 h

1 plate

4.8(11)

Larger Tiki 200% 6.5 inches tall

Designer

7 h

1 plate

5.0(8)

Open in Bambu Studio

Boost

123

329

260

176

Released

Description

A fun and stylized tiki totem, perfect for adding a touch of the tropics to your desk or shelf. Print it in some wood pla or paint it to fit the part and you could get it to look like the real thing. The main file is just over 3 inches and the 200% is about 6.5 inches tall. Hope you enjoy!

Comment & Rating (24)

@BrainPrints

Boosted

Great model -- I love the little maui. I printed it from Bambu PLA Dark Walnut. I wanted to make it bigger but the bigger I make it the more the tilt becomes noticeable. His left leg/foot seems lower so the hole model tilts just a tiny bit to his left side. Would you be able to modify the model just a bit to have him stand straight up? (Might be as easy as just extruding the bottom of the foot until they are level. I figure if you have the raw model and whatever was used to make the model it may be easier for you than to me trying to import and modify it. Thanks again for a fun model that is otherwise awesome.

The designer has replied

@Monchy_Bois

Thank you for the advice, I didn't even realize, I will take a look at the model and see what I can do!

@user_4161165131

Print Profile

0.16mm layer, 2 walls, 15% infill

He’s perfect.

@Monaana

Boosted

Print Profile

Larger Tiki 200% 6.5 inches tall

I made it a little bigger, 20 inch instead of 6 inch. I only have the printer for a few weeks now and this print was my test for how to make it bigger 🫣 a few bumps in the road, slice flaws from my side but I made it 🥳 very happy with the end result, it is gonna get a nice place in my tikibar

@user_3528058902

Print Profile

0.16mm layer, 2 walls, 15% infill

what a fun project to print!!

(Edited)

@TheTomKat

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Prints really well and the model is adorable, but I would edit the support settings for an easier removal as they tend to damage the underside of the model, and on the tiny scale Tiki the neck snapped while removing the supports.

@Monaana

Boosted

excellent print, just love it

@jschambe

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

cool design but the print is very weak at the neck and the head breaks off easily during support removal

@NuoviInizi

Boosted

this was a fun tiki statue to make

@user_3244354434

Boosted

Great model. I'll be ordering some wooden colored pla and trying it again.

@user_2471554710

Print Profile

0.16mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

French Bulldog Statue

Joka14

11.6 k

4.2 k

Valentine's Day Couple Statue

SabreDesign

10 k

5.4 k

Rumi Statue Kpop Demon Hunters

SaySimonSez

7.2 k

2 k

Spartan Warrior skulptur

Dexter

6.7 k

3.5 k