NOTE: This is for the AMS HUB, not the AMS BUFFER. There is a different model for the BUFFER.

The AMS Buffer sometimes needs a guide such as this, to help prevent an AMS pull-back error. I've heard that the AMS Hub does not suffer from this same issue. But I made this guide anyways for consistency's sake. However, because of the placement of the AMS data/power cable, it's impossible to get a perfectly straight output from the AMS Hub; so this was the closest I could get.

There are two versions: one standalone, and another for use with the X1C spool holder.

You should have longer M3 screws in the accessories kit that came with your printer.

If you don't have any, you can buy any generic M3 hex socket screw kit off Amazon.

You can find other models I have released for the X1C/AMS here:

https://makerworld.com/en/u/2811301167/collections/109412

If you appreciate my models, please consider buying me a coffee!