Search models, users, collections, and posts
Spiderman Lightbox for Desk
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
3.1 h
1 plate
Open in Bambu Studio
Boost
105
261
12
5
200
119
Released
Description
A Spiderman lightox to be put on your desk beside you.
- It has a base with 50% infill to add weight to the bottom so that it would be stable on the desk
- The box is 30mm thick.
- It has a 3.2mm hole in the back to pass power supply for the LED.
- Two layers printed on the cover that act as reflective layer for the light.
- There is an 0.15mm tolerance between the cover and the wall so they fit perfectly.
- It all can be printed on one plate .
Filaments used:
- eSun PLA+ Black
- eSun PLA+ Engine red
- eSun PLA+ Cold white
- eSun PLA-Silk Silver
LED installation:
- Used 5v COB LED 6000k from Amazon here https://amzn.to/4hGKDbg
- I install the LED on the wall and not on the back. The reflective layer should take care of reflecting the light to increase the density of it.
- I hot glue the led from multiple places even that it has adhesive back
- I cut the usb wire. Pass it from the cover first. Then solder it to the LED.
Cover installation:
- I use super glue to attach the cover.
License
This user content is licensed under the MakerWorld Exclusive License.
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (12)