What a great and clean design! Look amazing. Thank you!

sevsti

0.2mm layer, 3 walls, 15% infill

Flywooki

Perfect wall storage for my DJI goggles. Love the fit!

frps

andreasshe

Nick

Vertical tree support 0.2mm layer, 3 walls, 15% infill

PLAyful Prints

weagun

user_2206230735

Lonni_FPV

Oscator

Julian Hof

cover

plate_1.png

tempImage1Bt9zy_ce2b7b2a-91fe-41c4-b7f5-16100a6284fc.webp

i printed it with PETG and 0.2 layerheight, with 3 Walls and 15% infill

Halthan Labs

IMG_2162 Large.jpeg

Screenshot 2025-04-07 at 12.01.44 PM.png

IMG_2164 Large.jpeg

IMG_2163 Large.jpeg

I made a minor cut to the end of the halter to allow for better bed adhesion and printed it vertically with tree supports and custom interface spacing.&nbsp;I found the original version laying on its side led to one side having very rough markings from the supports. &nbsp;So I changed it to Arachne, 3 walls, with 15% gyroid infill. Added some variable layer height at the bottom and custom tree supports to minimize any rough spots on the final print. Only needed very minor deburring and turned out great. <ul><li>Feel free to print at a slower speed and 0.16mm layer height for better results. </li></ul>&nbsp;Printed with gray Sunlu PLA+2.0 but any regular PLA should work fine.

Hello this is a holder for the DJI Goggles V2 for the IKEA skadis wall. You can easily hang on your goggles v2 and it is very minimalistic and looks very cool.

DJI Goggles v2 Skadis Holder 

ASIA

Print Profile(2)

Description

Comment & Rating (16)

License

Related Models