Search models, users, collections, and posts
Release Mechanism SG90 Micro Servo Rack and Pinion
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 20% infill
Designer
1 h
1 plate
Open in Bambu Studio
Boost
323
770
8
5
668
238
Released
Description
- Simple rack and pinion servo setup for a SG90 Micro Servo.
- You will need 4 each m3 nuts and 4 each M3 x12mm Bolts. The rest of the hardware is included with the Servo.
- Pause at layer height 7.2mm to add in the 4 each M3 nuts. I added this to the print profile.
- No Supports
- Use 1/16th Steel rod and tap it into the Pinion with a hammer. This is a friction fit.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)