topographic map of andorra

this is a topographic map of andorra which demonstrates the elevation of the country i created it using terrain2stl exported it into fusion 360 put a map of andorra underneath traced it and cut out the non andorra parts  

you can create your own here  https://jthatch.com/Terrain2STL/

if you want to change the exaggeration of the terrain you can just scale it on the z axis

i used bambu lab pla matte charcoal for the base and bambu pla basic green and orange (i got from the p1s) and bambu petg basic red because i ran out of pla

 i recommend printing at 0.08 mm or if you have a 0.2 mm noozle 0.04 mm layer heights this makes the colors slightly see trough in some parts making a more gradual shift

i could consider doing requests