The Wave Weaver Duck Call (100% 3D Printed)

Check out my Newest Single Reed Duck Call, the Two Tone: https://makerworld.com/en/models/1555538-the-twotone-duck-call-100-3d-printed#profileId-1634322
                                                                

Looking for a Double Reed Duck Call?
Check out my newest model, the Double Ducker here: https://makerworld.com/en/models/1377404-doubleducker-double-reed-duck-call-100-3d-print#profileId-1425131 

Ultimate Reed Set and Reed Box:

I have done a ton of work designing 15 new Reeds to work with my mallard calls! I even created a beautiful Reed Box to store them all in! Check it out here: https://makerworld.com/en/models/1236322-duck-call-reed-box-and-ultimate-reed-set#profileId-1255995 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

PLEASE READ DESCRIPTION!!!

Here is the “Wave Weaver” Mallard Call! Main body can be printed at .2mm using PLA with 15% infill. I recommend printing the reeds at .1mm because they are so thin. This call works like a cold drink of water, and feels very fluid in the hand…. lol

IMPORTANT:
This model does not contain the wedge slot like some of my other designs do. This is great, because there is no longer anything to break! 


There are assembly instructions attached below!!!

I've done quite a bit of tinkering with reed designs and I have attached a few of the best sounding versions to this post for you guys to try out! The tone, volume, and raspiness of the call will be different with each of the reeds. Try them all and see which one you like best. You can also just throw an actual duck call reed and cork in there if you want to.

There are many different styles of calls, and they can be modified to meet most needs/wants. I can try to model different calls by request! I will continue to try and upload the best quality models that I can in the future!