PVC 4 in (100 mm) end cap

This is NOT a snug fitting cap.

This is a replacement for a 4 in (100 mm) PVC sewer drain pipe. Mine broke over the long weekend from the heavy snow/ice storm and I needed a quick replacement. There is a slight variability in the PVC pipe thickness on my property so I added approximately 4 mm of clearance (2 mm additional radius). The current print has a loose fit. Resize in the Bambu software if you need a snug fit.

This cap is also approximately 10 mm deeper than the standard 4 in PVC caps. The weather broke a small piece off my PVC pipe, which I covered with the extra depth to block snow from getting in.

Adjust the size in the Bambu software for a snug fit, or reduced depth.