Hueforge Kamera
Print Profile(1)
Description
Hueforge BIld von einer Spiegelreflexkamera
Meine Datei, ist voreingestellt und die layer um die Farbe zu wechseln sind auch eingestellt.
Project: Kamera.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 199.84x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 4.6mm and the Actual Depth is 1mm
Filaments Used:
PLA Kingroon White Transmission Distance: 4.7
PLA Kingroon Gray Transmission Distance: 2.1
PLA Kingroon Black Transmission Distance: 0.2
This print uses 3 unique filaments
Swap Instructions:
Start with White
At layer #8 (0.72mm) swap to Gray
At layer #11 (0.96mm) swap to Black for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)