The Devil Quartararo Hueforge
Print Profile(1)
Description
El Diablo Quartararo Hueforge
Boost Me (for free)
Thanks for your support ;)
Project: El_Diablo20.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 3.1
PLA R3D Red Transmission Distance: 3.8
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #13 (1.12mm) swap to Red
At layer #17 (1.44mm) swap to White for the rest.
Please leave a comment and like if you like my Hueforge. Thank you very much.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)