PITTSBURGH 1/4 in. Drive Star Bit Socket Set Tray - Free 3D Print Model

Search models, users, collections, and posts

ChopperOriginals

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

A1 mini

X1 Carbon

P1P

H2D

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

2 color, 0.2mm layer, 2 walls, 10% infill

Designer

1 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Description

All Compatible Lightbox Frames & Mounts Available Here!

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues) Magnets (for optional mounts)

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Designed to fit the Harbor Freight PITTSBURGH 1/4 in. Drive Star Bit Socket Set, 6 Piece Item #68015,

Bottom recessed for four 12x3 magnets.

Check out all my tool box organizers here!

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.

Comment & Rating (4)

@user_3161796618

The numbering on the top is terrible.

The designer has replied

@Chris_Robertson

A lot of text to fit in 4 inches. The only way to get them clearer would be to use a .2 nozzle.

@Chris_Robertson

I just opened this in my Bambu Studio and it appears I did not have Arachne wall generator turned on. I have updated the print profile if you would like to download and try again. Should make a big difference as it will print the thinner walls.

@user_733836481

Print Profile

2 color, 0.2mm layer, 2 walls, 10% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.