TLPOD

cover

20250216_155445-ezgif.com-optimize[1].gif

20250216_155633.jpg

20250216_155639.jpg

20250216_155754.jpg

20250216_155843(0).jpg

plate_1.png

plate_2.png

2025-02-16_16852ae051a22.jpg

Standard settings just with smaller layer hight for the swatch ramp and arachne wall generator

Arcane walls, Fine layer height for the ramp, All printers

Bobelism

two_(1).png

IMG_0992.jpg

The ramp is adapted to function in both ways.Same settings as the original print profiles.There is just one piece in the print file.

Both Ways Ramp - Same settings

plate_3.png

zdcentral

IMG_2671 copy.jpg

The original base was too loose for me, so I increased the center peg size so that it is a snug fit (may require some force). The top is the original. I also included a plate with both pieces so that you can print the whole set in one go!Even with the fine layer height, I recommend a quick sanding of the ramp to get the best slide.

Tighter fit and single plate

Théorie 101

Capture d’écran 2026-06-20 092721.png

0.2mm nozzle, 0.1mm layer, 4 walls, 5% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoy my models consider leaving a boost this really helps me out!</boostcontent></boostme>Mini Filament Swatch Lifting Spinner Display&nbsp;This is my Mini Filament Swatch Lifting Spinner Display! A compact, 100% 3D-printed spinning stand for your Bambu Lab filament swatches – no hardware needed!&nbsp;I’ve seen several spinning swatch displays, but they were all large and took up too much space. So, I designed my own. The filament swatches come with the A1 series printers, and most users likely won’t use the ABS swatches, plus many colors look similar anyway. My version holds up to 40 swatches, making it super small and efficient!&nbsp;Assembly: Just press the bottom part into the top, add your swatches, and you’re done!&nbsp;ENJOY!

Mini Filament Swatch Lifting Spinning Display

ASIA

Print Profile(4)

Description

Comment & Rating (261)

License

Related Models