Ski and Pole Carrier Handle
Print Profile(2)
Description
If you're into skiing, you'll absolutely love this.
The version 1.1 file is good for ski's with a narrower width.
The EXTENDED profile is for larger all mountain skis with a larger width (I use them on 99's and there is room for more)
Printing tips
Print using some strong material (ABS, Nylon...), I have tested it with PETG and PLA and it works but the stronger material you have the better. I cracked the top of one with less walls and less infill so the following is recommended:
5 perimeters or more
5 top/bottom or more
50% infill or more
Use the print profiles or click the dropdown to access all the files under: Download STL/CAD Files
Just print 2 copies, and say goodbye to the hassle of carrying your skis and poles. These clips keep your skis together, and the attaching points for the poles allows you to keep poles and skis all together while horizontally aligned, allowing the poles to be used as “handles” to carry it all.
Posted with permission from Layer By Layer based of the printables file of the same name.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (261)