Buck Rogers in the 25th Century Hueforge

One of my favorites.  Buck and Wilma from ‘Buck Rogers in the 25th Century’.

Project: Buck Rogers with Border.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Beige

Border Only Colors from here until the end.
    At layer #21 (1.76mm) swap to Ivory White for the rest.