Tactical Vest / Plate Carrier Hanger - Free 3D Print Model

Search models, users, collections, and posts

SouleatR_99

Household>Other House Models

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.24mm layer, 2 walls, 10% infill

Designer

2.5 h

1 plate

4.5(64)

Open in Bambu Studio

Boost

605

1856

1.3 k

921

Released

Description

This is a sturdy coat hanger designed for tactical vests because they keep falling off regular coat hangers. The hooks on the sides keep the vest from falling off. You should choose the infill based on the weight of your vest, for mine i used 10% Gyroid infill. The dovetails on the model snap in place and stay there like a press fit, i didnt need glue on mine but if your printers tolerances are bigger a drop of glue could be useful

If you like the model a boost would be greately appreciated, thank you :)

Comment & Rating (96)

@alastor09

Boosted

I absolutely love it, I’ve used it all day and it hasn’t broken, I thought it would break on the first use but it didn’t Double boost

The designer has replied

Show original

@SouleatR_99

thank you so much my friend, i hope it wont break while you use it. If it breaks nonetheless try printing with more infill for more stengh

@alastor09

Boosted

Replying to @SouleatR_99 :

I have a problem; it does not hold up over time and disassembles

Show original

@SouleatR_99

Replying to @alastor09 :

oh im sorry to hear that. Maybe print it with more infill and glue the joints in place with super glue?

@B1GH3C75

Rock Solid very clean print!!!

The designer has replied

@SouleatR_99

thanks, glad you liked it

@user_89305182

ew do you have a trump punisher on your PC, gross.

@user_2055083858

Print Profile

0.24mm layer, 2 walls, 10% infill

Made this after the vest broke or bent several other hangars. I expect I’ll be making them for the entire posse.

The profile uploader has replied

@SouleatR_99

Thanks so much. I have read a few comments about the joints getting loose so i would recommend you to print the others with more infill and use superglue on the joints

@user_2055083858

Replying to @SouleatR_99 :

I used a few drops of super glue on each joint (and a drop on my finger, smh) and its holding together very nicely.

@D.grootenboer

Print Profile

0.24mm layer, 2 walls, 10% infill

Works great, idk if it was just mine but it was a bit loose. but nothing an sodering iron coulnt fix!

The profile uploader has replied

@SouleatR_99

thanks, happy to hear that. If it gets too loose maybe reprint and use superglue for the joints

@WhiteWolfe

The design is nice. Prints great and I have about 25 pounds hanging on it now. FLASHFORGE PETG-CF 8 WALLS SOLID INFILL. 😁 When I get my next BOOST it's yours!!!!!!

@Math701s

Print Profile

0.24mm layer, 2 walls, 10% infill

Took quite a lot of force to press the three parts together but it worked in the end. Super well made!

@rhinohorn44

Boosted

Print Profile

0.24mm layer, 2 walls, 10% infill

Nice.

@AlmostTierOne

Not heavy duty! I foreseen this happening and printed in PETG with 4 walls instead of the 2 in your profile. Even this was not enough to hold a messily 25 pound training vest. The joint will always be an issue, going to go with a smaller single piece design instead.

@user_902672138

Great print but any suggestions on how to make the top layer look a bit smoother? Thank you!

@Mike_Raphone

Hrmmm... How's it hold up to a carrier w/ a full set of AR600 plates, magazines, radio pouch and back pack? LoL. I'll try it with 65% infill and let ya know.

@Mike_Raphone

Printed in PETG with 65% infill and glued the joints with 5min. epoxy. Hung the carrier about an hour ago and so far so good. Cool!

(Edited)

@WhiteWolfe

Replying to @Mike_Raphone :

Is it still holding?

@Mike_Raphone

I ended up printing a couple of shoulder pieces to both reinforce the hanger and be a bit kinder to the padding in the shoulder straps. I epoxied these to the hangers and both my kits are still hangin' happy. This is just the first iteration of the reinforcements and I may refine it a bit and upload the model to Makerworld. these turned out to be an unnecessarily tight fit. As pictured the whole thing is 20 something pounds and there are still a few things not on it so the added pieces just make me feel more warm and fuzzy about the arrangement.

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bambulab Plate Holder x3 x5 x7 slots

rky.91

21.5 k

5.8 k

Dummy 13 Plate carrier/ Tactical vest / Armor

DazzD999

134

Hat Hanger

Luke Nicholson

16.7 k

7.2 k

IKEA Skadis Plate Carrier / Armor vest hanger

DarthJJ

103