Search models, users, collections, and posts
Miter saw finger saver
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 20% infill
Designer
16.3 h
3 plates
0.2mm layer, 4 walls, 20% infill
25 h
4 plates
Open in Bambu Studio
Boost
327
1527
53
48
512
248
Released
Description
This is my take on the commercially available 10 million dollar stick. It's completely my design using their concept.
I made this for use at the miter saw, but the possibilities are endless for many wood shop tools.
The PLA front and back are joined by a 1" Oak dowel rod inserted into both halves, covered with a TPU hand grip, and TPU feet pads.
This configuration gives you about 18" overall length. Longer or shorter versions can be made simply by changing the length of the wood dowel and handle grip.
If you have any suggestions, please don't hesitate to comment them.
Let me know what you thing, good or bad.
THANKS!
Boost Me (for free)
I you like what you see. please give me a Boost. I'm new at this and need all the help I can get.
THANKS!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (53)