Search models, users, collections, and posts
Rising Shell by Robert van Embricqs
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill, no support, print-in-place
Designer
5.2 h
1 plate
Open in Bambu Studio
Boost
25
53
4
2
32
11
Released
Description
This is a model inspired by the Rising Shell of Robert van Embricqs. This model is a print-in-place one, and I used the chain joint to connect the sticks, which makes the product stronger. Thanks to the great Bambu printer, it was printed by my P1S without any support and no issues.It is used all the space of the plate, so it would not be printable by P1A mini. :(
As it is a print-in-place model, some of the joints would be connected to each other. So for the first time to rise the shell, please apart each joint chain gently and push the whole model into the middle slowly to loose the connection rods of the sides of the Rising Shell. Once it is done. It should have no issue later on.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (4)