Swiffer Wetjet Refillable Nozzle and Cap

This is a nozzle with threaded cap to refill a swiffer wetjet bottle with whatever floor cleaning solution you choose. Don't need to buy new bottles or try to get the cap off the bottles which they make difficult to do.

All that is required is to cut a hole in the top of a wetjet solution bottle and press this fill nozzle into it. I put a bead of hot glue around the base to hold it tight, but I don't think it's absolutely necessary.

Start with a small hole. Use a dremel or something similar with a sanding drum and gradually enlarge the hole, testing until it's correct. Make the hole just big enough so you have to put some effort into pushing the base part into the hole.

There is in indentation where you should install the nozzle. Once you have the part pressed snugly in place, pull up to expose the seam where you should run the bead of hot glue. Try not to touch the glue gun to the part for very long lest you melt it.

Once the hot glue has cured, push the nozzle and bottle recess back down into shape.