SpiNeo

Hello all. This is my first hueforge creation celebrating one of my favorite paintings by Basquiat. 

Back of the Neck “SpiNeo”  is a silkscreen print by Jean-Michel Basquiat that depicts a muscular body with a warped spine and arms. The print is considered one of Basquiat's most iconic works.

HueForge Info

• Z Scaling : Adjusting the Z-axis scaling on any Hueforge will disrupt the intended coloring and result in an inaccurate print. However, you can modify the X and Y scaling to resize the image—just ensure you scale both axes by the same percentage for consistency.

   

• Filament Selection: For an accurate print that matches the reference photos, you must use the same filament colors listed below. While switching brands is possible (as long as they are similar), changing filament colors will alter the final outcome.

   

• Slicer Preview vs. Final Print: What you see in the slicer will not exactly match the final print. Hueforge relies on color bleed to create blended effects that emerge during printing.

   

• Bed Adhesion: Ensure strong bed adhesion to prevent lifting and warping, which could ruin your print.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x100mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 1
    PLA BambuLab Basic Red Transmission Distance: 1
    PLA BambuLab Matte Lemon Yellow Transmission Distance: 0.7
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Red
    At layer #13 (1.12mm) swap to Lemon Yellow
    At layer #15 (1.28mm) swap to Jade White for the rest.